Manufactured on high-speed continuous foaming and double-belt lamination lines, our CE-certified panel systems comply directly with European Standard EN 14509:2013 and Hellenic building codes.
Heavy-duty insulated envelope with cam-lock tongue-and-groove joints, delivering thermal performance down to -35°C for Greek central food distribution hubs.
Inspect Technical Data →
Precision-braked weathering flashings with EPDM seal gaskets to eliminate thermal bridging and capillary water intrusion on roof penetrations.
Inspect Technical Data →
High-tensile zinc-coated steel profiles with specialized C4 marine barrier coatings designed for Mediterranean coastal agricultural sheds and warehouses.
Inspect Technical Data →
Certified EI120/EI240 fire-rated structural mineral core with high sound dampening for industrial zones and high-occupancy commercial facades in Greece.
Inspect Technical Data →
Hygienic, anti-microbial food-safe partition panels ideal for dairy processing (feta), olive oil packaging, and pharmaceutical internal room dividing.
Inspect Technical Data →
Galvanized secondary framing with high section modulus engineered to support rooftop photovoltaic arrays in accordance with Eurocode 1 & Eurocode 3.
Inspect Technical Data →
Pre-engineered modular chiller/freezer systems optimized for island hospitality complexes, remote agricultural cooperatives, and port containers.
Inspect Technical Data →
Aesthetic exterior facade siding combining polyurethane insulation with architectural textures, UV-stable coatings, and hidden-fastener joint interlocks.
Inspect Technical Data →Greece presents a demanding convergence of high seismic activity (Eurocode 8 / Greek EAK-2000), intense Mediterranean solar radiation, coastal marine salinity (ISO 12944), and stringent energy conservation regulations under KENAK (Hellenic Energy Performance of Buildings Regulation).
Under the revised Greek KENAK framework, industrial and commercial structures must achieve low envelope thermal transmittances (U-values below 0.22 W/m²K for opaque exterior walls). Our PIR foam cores achieve a thermal conductivity as low as 0.022 W/m·K, permitting thinner facade panels while significantly lowering HVAC operating costs under extreme Aegean summer heatwaves exceeding 42°C.
As Europe’s most seismically vulnerable zone, Greece enforces strict dynamic drift performance across Seismic Zones I, II, and III. Our concealed-fastener facade panels integrate heavy-gauge internal reinforcement load plates and slotted sub-girt brackets that allow independent inter-story lateral displacement without inducing panel face buckling or joint seal failure.
With thousands of kilometers of coastline across the Peloponnese, Attica, and the Greek Islands, standard coil coatings degrade rapidly. We specify heavy-duty 275 g/m² zinc substrate steel coated with 50μm High-Durability Polyurethane (PUDAL), Super Polyester, or Polyvinylidene Fluoride (PVDF) that withstand 1,500+ hours of continuous salt-spray testing per EN 13523-8.
Strict Hellenic fire safety compliance mandates high fire resistance for industrial corridors, storage logistics, and high-occupancy hotels. Our structural Rockwool facade sandwich panels achieve non-combustible classification (Euroclass A2-s1, d0 / A1 core) and up to 240 minutes of structural integrity and insulation (EI240), eliminating hazardous flame spread and toxic smoke propagation.
| Insulation Core Type | Thermal Conductivity (λ) | Euroclass Reaction to Fire | Standard Core Densities | Target Greek Applications | Optimal Thickness (KENAK nZEB) |
|---|---|---|---|---|---|
| Polyisocyanurate (PIR) | 0.022 W/m·K | B-s1, d0 (EN 13501-1) | 40 – 42 kg/m³ | Logistics Warehouses, Attica Freight Hubs | 80 mm – 120 mm (U ≤ 0.18 W/m²K) |
| Structural Rockwool | 0.040 W/m·K | A2-s1, d0 (EN 13501-1) | 100 – 120 kg/m³ | Fire Compartment Walls, Industrial Zones | 100 mm – 150 mm (EI60 to EI180) |
| High-Density PUR | 0.024 W/m·K | B-s2, d0 (Self-extinguishing) | 38 – 40 kg/m³ | Controlled Agro-Food Packaging & Sheds | 60 mm – 100 mm |
| Cold Room PIR / PUR | 0.022 W/m·K | B-s1, d0 / Continuous Foil | 42 – 45 kg/m³ | Chillers, Deep-Freeze (Feta, Fruit Export) | 120 mm – 200 mm (Down to -35°C) |
Supplying major infrastructure, commercial expansion, and regional cold-chain distribution developments across mainland Greece and the Aegean archipelago.
The strategic expansion of the Port of Piraeus (COSCO terminal) and the Thriasio Pedio logistics masterplan requires vast distribution centers with low thermal inertia and rapid erection speeds. Our PIR wall panels allow clear-span purlin spacing up to 4 meters, minimizing secondary steelwork weights while meeting high European logistics warehouse specifications.
From central Macedonia’s peach and kiwi cold stores to Thessaly’s dairy cooperatives (Feta PDO production) and Peloponnese olive oil processing plants, hygiene and absolute vapor containment are vital. Our tongue-and-groove joint systems paired with food-safe plastisol coatings prevent mold formation and support daily high-pressure chemical washdowns.
Hospitality construction on islands like Crete, Rhodes, and the Cyclades requires lightweight dry-construction systems to bypass heavy on-island aggregate shipping costs. Decorative polyurethane siding and architectural micro-rib panels enable contemporary aesthetic finishes while shielding resort structural envelopes from high-UV degradation and salty sea spray.
Under Greece's National Energy and Climate Plan (NECP), industrial roofs are widely upgraded with photovoltaic installations. Our cold-formed galvanized omega and Z/C purlins, paired with high-tensile corrugated sandwich sheets, create a solid structural substrate that supports heavy photovoltaic loads while ensuring complete watertightness over decades.
Direct factory-to-project manufacturing and export logistics eliminating distributor markups, reducing procurement lead times, and ensuring single-source QA accountability.
Our production facilities utilize modern high-pressure pentane-blown continuous foaming lines. This ensures a closed-cell content exceeding 92%, homogenous density distribution without internal voids, and superior long-term dimensional stability under thermal cycling.
Every container of sandwich panels shipped to Greek ports (Piraeus, Thessaloniki, Patras) arrives accompanied by an authentic Declaration of Performance (DoP), factory production control documentation, and official lab test reports under EN 14509 for structural bending, shear strength, and creep.
We provide direct breakbulk and 40ft High Cube container shipping straight into Greek ports. With sea transit routes optimized across the Eastern Mediterranean, our clients benefit from delivery turnaround times that outperform congested European overland routes.
Beyond insulated sandwich panels, we supply complete facade sub-framing systems, including cold-rolled C and Z purlins, metal decking, color-matched corner and parapet flashings, self-drilling bimetallic fasteners with vulcanized EPDM washers, and mastic vapor seals.
Precision roll-forming, computerized polyurethane dosing, and specialized packaging engineered for marine container shipments.
Direct, technically verified answers regarding building permits, Eurocodes, shipping terms, and installation requirements across Greece.
Yes. KENAK sets strict U-value thresholds for external walls, typically requiring U ≤ 0.22 – 0.25 W/m²K depending on the Greek climatic zone (Zones A through D). Our 100mm PIR panels achieve a certified U-value of 0.21 W/m²K, and our 120mm panels achieve 0.18 W/m²K, comfortably passing nZEB (nearly Zero Energy Building) criteria for commercial and industrial permits.
For installations situated within 3 kilometers of the coastline, we strongly advise against standard 25-micron polyester coatings. We supply coils with zinc galvanization of 275 g/m² paired with 50-micron High Durability Polyurethane (PUDAL), Plastisol, or PVDF coatings, achieving C4 or C5-M marine atmospheric corrosion ratings under ISO 12944.
Our engineering team details perimeter joints and structural fastener schedules with slotted support cleat systems. This design accommodates inter-story drift without transferring seismic shear stress into the panel core, preventing skin delamination, joint deformation, or secondary fastener failure during seismic events.
For fire compartment walls, stairwells, and facilities storing combustible goods, we supply Rockwool core sandwich panels rated Euroclass A2-s1, d0 with structural fire resistance from EI60 up to EI240. For standard exterior facades, our PIR panels achieve Euroclass B-s1, d0 (self-extinguishing, no flaming droplets, minimal smoke release).
Yes. Continuous line production allows us to manufacture panel lengths tailored to your elevation heights, ranging from 2.5 meters up to 14 meters (governed by the practical length of 40-foot High Cube shipping containers or breakbulk shipping specifications). Custom lengths minimize horizontal lap joints, speeding up installation and preserving envelope integrity.
We routinely execute shipments under CIF Piraeus, CIF Thessaloniki, or FOB shipping points. Factory production typically takes 10 to 18 working days depending on quantity, and maritime sea freight transit to main Greek ports takes approximately 10 to 14 days. We provide complete commercial shipping dossiers, EUR.1 / Certificates of Origin, and DoP documentation.
Yes. Our cold-chain sandwich panels can be furnished with food-safe PVC/PVF film coatings (certified under European food contact regulations). They resist common food acids, high-pressure steam cleaning, and industrial sanitizers without degradation, making them ideal for feta cheese maturation rooms and packaging lines.
Yes. We offer fully integrated envelope packages including cold-formed galvanized Z & C purlins, roof omega rails, structural brackets, matching flashings (ridges, eaves, drip edges), EPDM expanding seals, and bimetal stainless steel self-drilling fasteners, providing contractors with an aligned, single-supplier building package.
Connect directly with our facade and cold-chain engineering specialists for custom calculations, KENAK thermal checks, sample requests, and CIF delivery quotes to any Greek port or job site.
Our sales engineers respond to project questions during working hours (GST+4).