Manufactured under strict ISO 9001:2015 and CE EN 14509 protocols. Designed specifically to prevent subfloor frost heave, resist heavy reach-truck point loads, and guarantee zero-thermal-bridge airtightness across commercial chillers and deep-freeze logistics hubs.
Designing and constructing low-temperature floors for cold storage in Israel presents unique geotechnical and thermodynamic challenges. With coastal locations like the Port of Ashdod, Haifa Bay, and Rishon LeZion experiencing relative humidity averaging above 75% alongside high water tables, and inland zones like the Jordan Valley or the Arava Desert subject to ground temperatures exceeding 38°C, any discontinuity in the subfloor thermal envelope results in rapid condensation, ice-lens formation, and catastrophic frost heave.
When operating deep-freeze facilities at -22°C to -28°C, the 0°C isotherm steadily penetrates downward through ordinary reinforced concrete. Without a continuously engineered underfloor insulation system and active sub-slab ventilation or heating grids, moisture within the underlying soil freezes, expands by roughly 9% in volume, and creates upward hydrostatic pressure that fractures floor slabs, misaligns automated AS/RS racking, and ruptures structural perimeter columns.
| Insulation Sub-System | Material Core | Compressive Modulus | Thermal Conductivity (λ) | Moisture Vapor Permeance | Israel Primary Application |
|---|---|---|---|---|---|
| XPS Underfloor Foundation Slab | Extruded Polystyrene (CO2/Enviro-Blown) | 350 – 650 kPa (at 10% deflection) | 0.028 – 0.032 W/m·K | ≤ 0.5% by volume (EN 12087) | 3PL High-Bay Logistics (Modi'in, Caesarea) |
| Heavy-Duty Cam-Lock Floor Panel | Rigid Cyclopentane High-Density PIR | 220 – 300 kPa (Plywood/Alloy reinforced) | 0.021 – 0.023 W/m·K | Impermeable with welded alloy skins | Commercial Walk-In Freezers & HoReCa |
| Phenolic Foam Foil Board (PF) | Thermoset Closed-Cell Phenolic | 150 – 200 kPa | 0.020 W/m·K (Class 0 Fire) | Class A Vapor Foil Backed | Pharma Cleanrooms (Teva/Rehovot Hubs) |
| Interlocking Drainage Slats | Virgin High-Impact Polypropylene | Point Load > 2.5 tonnes/m² | Thermal Decoupling Spacer | Continuous Drainage / Aeration Channels | Kashrut-Compliant Meat & Poultry Abattoirs |
Our manufacturing plants utilize continuous four-component high-pressure foaming systems using zero-ODP, low-GWP cyclopentane blowing formulations. These panels provide closed-cell content surpassing 95%, ensuring that the insulation does not degrade in the high salinity coastal air of Ashdod or the alkaline soil profiles prevalent across Israeli industrial development corridors.
From Arava date agriculture to pharmaceutical distribution in central Israel, our cold room floor systems are built to withstand regional operational rigors, sanitary washdown requirements, and extreme ambient differentials.
Packaging and rapid pre-cooling stations across the Arava Desert, Jordan Valley, and Galilee. Engineered for storing Medjool dates, citrus, and field peppers where ambient heat reaches 46°C, requiring immediate pull-down without floor perimeter condensation.
High-turnover automated cold storage facilities in Ashdod Port, Haifa Bay, and Modi'in. Reinforced XPS under-slab cores sustain continuous heavy reach-truck corridors, AGVs, and multi-tier pallet racking systems with DIN 18202 super-flat surface tolerances.
Abattoirs, poultry plants, and dairy processing requiring strict Kashrut supervision and Ministry of Health (Misrad HaBriut) approvals. Seamless coved resin junctions and elevated polypropylene floor slats ensure non-pooling chemical drainage and rapid hygiene washdowns.
Ultra-low temperature (-40°C to -80°C) cold storage for active pharmaceutical ingredients (API) and biomedical laboratories in Rehovot and Petah Tikva. Class-0 fire rated Phenolic and PIR panels prevent volatile thermal drift and satisfy global GMP / GDP validation.
Israeli logistics developers and EPC contractors are rapidly transitioning from legacy low-efficiency EPS insulation to advanced continuous composite envelopes driven by three pivotal market dynamics.
Israel's National Green Building Standard SI 5281 is now mandatory for large municipal and industrial tenders. Cold store operators can no longer use HFC-blown insulation. Our factory exports low-GWP, zero-ODP cyclopentane formulations that yield optimal credits for thermal envelope efficiency and life-cycle building carbon footprints.
Land scarcity in Gush Dan and the Central District has prompted the construction of vertical cold storage exceeding 32 meters in clear height. These facilities require ultra-rigid XPS subfloors capable of withstanding concentrated static footings (>120 kN per rack upright) without millimeter-scale creep that could disrupt robotic cranes.
Israel's Fire and Rescue Commission (Rashut HaKaba'ut) rigorously enforces SI 921 compliance. Traditional polyurethane (PUR) has been largely superseded by high-index Polyisocyanurate (PIR) and Phenolic Cores that self-extinguish, char under direct flame, and produce ultra-low toxic smoke density ratings (EN 13501-1 B-s1, d0).
Combining heavy-industry continuous manufacturing capacity with meticulous containerized Mediterranean shipping logistics directly to Ashdod and Haifa terminals.
Fully automated continuous production lines minimize delivery lead times, enabling us to supply multi-thousand square meter industrial projects in Israel on tight EPC project timelines.
Every batch comes with certified CE EN 14509 testing, factory production control documentation, and independent test reports matching consultant submittal requirements across Israel.
Reinforced edge protectors, moisture barrier wraps, and tailored containerization prevent tongue-and-groove cam-lock deformation during maritime handling via Mediterranean transit routes.
Thicknesses from 50mm up to 200mm, with skin materials including 5-bar anti-slip aluminum diamond tread, 304/316 stainless steel, and antibacterial plastisol coatings.
Detailed technical, regulatory, and logistics answers for project engineers, HVAC&R consultants, and procurement directors sourcing cold room floor panels for Israel.
Consult with our senior cold chain structural engineers. Receive detailed thermal calculations, compressive load simulations, shop drawing layouts, and competitive CFR Ashdod/Haifa price quotations within 24 hours.
Our sales engineers respond to project questions during working hours (GST+4).